MikroTiK GESP Gigabit Ethernet Surge Protector

SKU: GESP
Previous
Next
Technical characteristics MikroTiK GESP Gigabit Ethernet Surge Protector:
Main features
Full list of features
A type Lightning protection module
Main
A type Lightning protection module
PoE standard IEEE 802.3af /at
Input connector RJ-45 /M/F
Additionally
Features Transient current absorption with overvoltage response from 100 V / s to 1 kV / µs
RJ45 10/100/1000 Ethernet data line protection
The maximum capacitance is 4 pF at 1 MHz
The minimum insulation resistance is 1 GΩ at 50 V
Strum discharge 5 kA (8 / 20 µs)
The maximum dynamic response voltage is 700 V at 1 kV / µs
Static operating voltage, DC 90 V at 100 V / s
ESD / EMI protection
Electrostatic discharge IEC 61000-4-2
On contact / air: ± 30 kV
Protection level IP67
Operating temperature -40°C to +70°C
Warranty
Warranty 12 months
Package dimensions
Width 90 mm
Height 40 mm
Length 210 mm
Weight 0.13 kg
Volume 0.0008 m3
RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable. Maximum suggested cable lenght is ~40 meters.
181 GEL*
out of stock
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.

Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.

Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.

Menu
Products catalog
Products catalog