MikroTiK
SKU: XS+DA0003
165 GEL*
expected
 
Direct attach cable that supports not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications. Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
SKU: XS+DA0001
122 GEL*
expected
 
We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications. Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m).
SKU: SAW30-240-1200GR2A
74 GEL*
expected
 
MikroTik SAW30-240-1200GR2A - 24V 1.2A power supply with angled plug. Input voltage - 110/220V; output voltage - 24V, 1.2A.
SKU: MTAD-5G-30D3-PA
1367 GEL*
expected
 
MikroTik mANT 30dBi 5Ghz Parabolic Dish antenna with precision aligmnent mount. mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.
SKU: SMASMA
56 GEL*
expected
 
MikroTik SMASMA is a 1 m SMA male to SMA male cable adapter that can be used to connect an LTE card. 1m SMA male to SMA male cable. 1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables). 50 Ohm impedance.
SKU: CRS354-48P-4S+2Q+RM
6238 GEL*
expected
 
A single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind.
SKU: CRS328-24P-4S+RM
2329 GEL*
expected
 
CRS328-24P-4S+RM - 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case, Dual Boot and PoE output, 500W.
SKU: CRS326-24G-2S+RM
1107 GEL*
expected
 
SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS.
SKU: RB962UiGS-5HacT2HnT
715 GEL*
expected
 
The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.
SKU: RB922UAGS-5HPacD-NM
930 GEL*
expected
 
This NetMetal version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card, a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas. The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure (IP54). Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for its high output power radio.
SKU: RBSXTsqG-5acD
303 GEL*
expected
 
The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.
SKU: RBcAPGi-5acD2nD
382 GEL*
expected
 
Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support and IPsec hardware encryption support. The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it.
SKU: CCR2116-12G-4S+
6213 GEL*
expected
 
Forget about CPU limitations in 10G setups with this powerful 16-core ARM CPU based CCR. Double the performance of our previous 36- core CCR, 6x faster BGP performance. Includes an M.2 PCIe slot.
SKU: RB5009UG+S+IN
1367 GEL*
expected
 
The ultimate heavy-duty home lab router with USB 3.0, 1G and 2.5G Ethernet and a 10G SFP+ cage. You can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.
SKU: RBCAPGI-5ACD2ND-XL
1 GEL*
expected
 
Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises. The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!
SKU: S+85DLC03D
368 GEL*
expected
 
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
SKU: CSS610-1GI-7R-2S+OUT
805 GEL*
expected
 
With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
SKU: XS+31LC10D
930 GEL*
expected
 
This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
SKU: S-RJ01
119 GEL*
expected
 
S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.
SKU: GPeR
181 GEL*
expected
 
Gigabit Passive Ethernet Repeater. The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem. Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
SKU: CRS318-1FI-15FR-2S-OUT
1055 GEL*
expected
 
With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept - aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
SKU: RBmAP2nD
211 GEL*
expected
 
The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
SKU: CRS106-1C-5S
368 GEL*
expected
 
The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.
SKU: RB960PGS
555 GEL*
expected
 
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
Menu
Products catalog
Products catalog