MikroTiK
SKU: RBwAPG-60ad-A
867 GEL*
out of stock
 
The wAP 60G AP is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors in different scenarios - Base Station, Point-to-Point or CPE. The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP supports up to eight simultaneous clients on distances of 200m+.
SKU: RBSXTR
555 GEL*
out of stock
 
10.5dBi 60 degree LTE antenna with 2x Ethernet ports (one with PoE out), WITHOUT LTE modem. The SXT R is an integrated low-cost 10.5dBi LTE antenna WITHOUT LTE modem (free miniPCI-e slot). In the case, if for any reason you don't want to use one of our own LTE modems, you can simply buy the SXT R and install the modem of your choice. The SXT R is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.
SKU: RBLHGR
743 GEL*
out of stock
 
High gain 21dBI LTE antenna for very remote areas, WITHOUT LTE modem. The LHG R is an integrated high gain 21dBi LTE antenna WITHOUT LTE modem (free miniPCI-e slot). In the case, if for any reason you don't want to use one of our own LTE modems, you can simply buy the LHG R and install the modem of your choice. Unit is designed, for remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t. Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available.
SKU: R11e-LTE
530 GEL*
out of stock
 
LTE miniPCI-e card for International bands. MikroTik 2G/3G/4G/LTE miniPCi-e card with 2 x u.FL connectors for International bands 1/2/3/5/7/8/20/38/40. The R11e-LTE is an LTE Cat-4 modem that delivers up to 150Mbps downlink and 50Mbps uplink data rate with 3G and 2G network fallback. This mini-PCIe form factor modem is designed for international bands. It can be used with any of our products that have miniPCI-e slot (exceptions RB800 and RB4011).
SKU: RB912UAG-6HPND-OUT
555 GEL*
out of stock
 
The BaseBox 6 in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem. Designed to use as an 6GHz AP with our 6GHz CPEs, like DynaDish 6 and SXT 6.
SKU: RBDYNADISHG-6HND
1117 GEL*
out of stock
 
The Dynadish 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, but this new device operates in the licensed 6GHz frequency. This means less interference than the often saturated 5 GHz frequencies for higher speed and more reach. By operating above the most popular WiFi frequencies you are now able to build your wireless links from busy towers without suffering problems with noise. It is a simple and completely integrated product with everything you need to quickly install a reliable point to point link.
SKU: RBSXTG-6HPND
618 GEL*
out of stock
 
SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.
SKU: DRP-LTM
56 GEL*
out of stock
 
DIN rail mounting bracket for LtAP mini series. DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.
SKU: RBLDF-2nD
243 GEL*
out of stock
 
The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.
SKU: RBM11G
305 GEL*
out of stock
 
Small size powerful OEM board with one Gigabit LAN and one miniPCIe slot. MikroTik RouterBOARD M11G with Dual Core 880MHz CPU, 256MB RAM, 1x Gbit LAN, 1x miniPCI-e, RouterOS L4. The RBM11G is a fully featured RouterBOARD device perfect for using with your own enclosure or building a custom solution. It uses the same square PCB and mounting holes as it’s predecessors, you can simply swap out the older models with the brand new RBM11G. The M11 features a new MediaTek dual core CPU running at 880MHz, a miniPCIe slot for using with a WiFi module of your choice, or with a 3G/ LTE modem (SIM slot provided). The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack.
SKU: RB912UAG-5HPnD-OUT
555 GEL*
out of stock
 
The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device.
SKU: RB911G-5HPnD-QRT
1055 GEL*
out of stock
 
The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, QRT is ideal for point to point links.
SKU: RBLHG-5HPnD-XL4pack
1973 GEL*
out of stock
 
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. The set includes 4 pieces.
SKU: RBLHG-5HPnD-XL
493 GEL*
out of stock
 
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
SKU: RBLHG-5nD
368 GEL*
out of stock
 
The LHG 5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
SKU: RBOmniTikPG-5HacD
805 GEL*
out of stock
 
OmniTIK 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
SKU: RB921UAGS-5SHPacD-NM
992 GEL*
out of stock
 
This NetMetal version is equipped with super high power 1.3W 2x2 dual chain 802.11a/n/ac wireless and two RP-SMA connectors for external antennas. The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it’s high output power radio.
SKU: RB922UAGS-5HPacT-NM
992 GEL*
out of stock
 
This NetMetal version is equipped with a miniPCI-express slot, a SIM slot for 3G/4G device or additional wireless card, a high power 3x3 triple chain 802.11ac wireless and three RP-SMA connectors for external antennas.
SKU: RB921GS-5HPacD-19S
1242 GEL*
out of stock
 
The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power. mANTBox 19s comes with 19dBi 120 degree sector antenna.
SKU: RB911G-5HPnD
343 GEL*
out of stock
 
MikroTik RouterBOARD 911G with 600Mhz Atheros CPU, 32MB RAM, 1xGigabit LAN, built-in 5Ghz 802.11a/n 2x2 two chain wireless, 2xMM. The RB911G-5HPnD is a small wireless router with an integrated 5Ghz high power wireless card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.
SKU: RB911G-5HPacD
493 GEL*
out of stock
 
MikroTik RouterBOARD 911G with 720Mhz Atheros CPU, 128MB RAM, 1xGigabit LAN, built-in 5Ghz 802.11a/c 2x2 two chain wireless, 2xM. The RB911 series devices are perfect for building low cost CPE devices, and now a new model has been added to line up - with 802.11ac support, to reach speeds not possible before. The RB911 series are small wireless routers with an integrated wireless cards. They are equipped with powerful 720Mhz CPU, providing superb value for money. These devices include RouterOS, the operating system which can be a router, firewall, bandwidth manager, a CPE and more, all at the same time. All devices have built-in 16kV ESD protection on the RF port.
SKU: RB912UAG-5HPnD
493 GEL*
out of stock
 
MikroTik RouterBOARD 912UAG with 600Mhz Atheros CPU, 64MB RAM, 1xGigabit LAN, USB, miniPCIe, built-in 5Ghz 802.11a/n 2x2 two cha. The RB912UAG-5HPnD is a very versatile device. It is a small wireless router with an integrated high power wireless card and an additional miniPCIe slot for 802.11 wireless, or 3G card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.
SKU: RB921GS-5HPacD-15S
867 GEL*
out of stock
 
The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power.
SKU: MTRADC4
930 GEL*
out of stock
 
Radome Cover Kit for mANT, reduces wind load, increases antenna operational life. Radome Cover Kit is now available for mANT 30dBi parabolic antennas! It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It's made from a special material that has a low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
Menu
Products catalog
Products catalog