MikroTiK
SKU: RBLHG-5HPnD
430 GEL*
out of stock
 
The LHG is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna. LHG HP5 comes with two times more output power than our regular LHG 5, and is designed to reach up to 60% longer distances.
SKU: RBLHG-2nD-XL
424 GEL*
out of stock
 
The Light Head Grid (LHG) is a compact and light wireless device with an integrated dual polarisation grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE. LHG XL 2 is equipped with 21 dBi grid antenna for longer distances.
SKU: RBLHG-2nD
362 GEL*
out of stock
 
The Light Head Grid (LHG) is a compact and light 2.4 GHz 802.11b/g/n wireless device with an integrated dual polarization 18 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
SKU: RBLDFG-5acD
362 GEL*
out of stock
 
The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.
SKU: RBDiscG-5acD
430 GEL*
out of stock
 
DISC Lite5 ac - outdoor 5GHz 802.11a/n/ac wireless device with a backfire type 21dBi integrated antenna and Gigabit Ethernet for longer distances.
SKU: RB924I-2ND-BT5&BG77
618 GEL*
out of stock
 
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supported by countless mobile operators around the globe.
SKU: CWDM-CHASSIS-2
368 GEL*
out of stock
 
Chassis MikroTik CWDM-CHASSIS-2 for multiplexer CWDM-MUX8A
SKU: CWDM-MUX8A
2366 GEL*
out of stock
 
MikroTik CWDM-MUX8A is an 8 port dual fiber multiplexer for use with CWDM and SFP + CWDM SFP transceivers. This passive MUX/DEMUX device allows you to combine up to 8 VOLS into one in order to simplify and reduce the cost of installing a large VOLS. Coarse spectral multiplexing or optical channel multiplexing (CWDM) technology offers a solution to increase the throughput of the existing VOLS infrastructure by multichannel traffic/spreading several wavelengths over one fiber and reducing the cost of deploying new fiber lines.
SKU: CA150
118 GEL*
out of stock
 
Black aluminium indoor case that fits the RB450 and RB850 series devices.Black aluminium indoor case with installation set. Fits RB450, RB450G and RB850Gx2.
SKU: CRS310-1G-5S-4S+OUT
1176 GEL*
out of stock
 
netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.
SKU: CRS354-48P-4S+2Q+RM
6238 GEL*
out of stock
 
A single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind.
SKU: CRS328-24P-4S+RM
2329 GEL*
out of stock
 
CRS328-24P-4S+RM - 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case, Dual Boot and PoE output, 500W.
SKU: CRS312-4C+8XG-RM
4115 GEL*
out of stock
 
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.
SKU: S+AO0005
213 GEL*
out of stock
 
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003).
SKU: ACSMAUFL
56 GEL*
out of stock
 
U.fl-SMA female pigtail, that can be used to connect your Modem (LTE/LoRa/Wireless card) with U.fl connectors to an external antenna.
SKU: ACGPSA
56 GEL*
out of stock
 
ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected to LtAP or LtAP mini via the ACSMAUFL pigtail (available for ordering separately).
SKU: R11E-LTE6
680 GEL*
out of stock
 
The R11e-LTE6 is an LTE CAT6 modem that delivers up to 300 Mbps downlink and 50 Mbps uplink data rate with 3G and 2G network fallback. CAT6 also features carrier aggregation and allows the device to use multiple bands at the same time. This miniPCIe form factor modem is designed for international bands. It can be used with any of our products that have miniPCIe slot (exceptions RB800 and RB4011).
SKU: GESP+POE-IN
74 GEL*
out of stock
 
You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.
SKU: RB912R-2nD-LTm
618 GEL*
out of stock
 
The LtAP mini is a small weatherproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot, so you can use your own LTE modem of your choice. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. The unit has several powering options: 12-57 V PoE-in by Ethernet port, 8-30 V DC jack and 5 V microUSB.
SKU: RBwAPGR-5HacD2HnD
867 GEL*
out of stock
 
The wAP ac LTE is a powerful dual-band wireless AP with LTE backup and two Gigabit Ethernet ports. A small package with a huge ambition – the wAP ac LTE is an extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on our popular weatherproof wAP form factor. It has two Gigabit Ethernet ports – you can use the device as a wired router with LTE backup via the Micro SIM slot. Alternatively, you can also enjoy wireless experience anywhere – indoors or outdoors. wAP ac LTE is designed to deliver strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30 C‎° to +60 C‎ and can be easily mounted on walls, ceilings or poles.
SKU: RBwAP2nD
210 GEL*
out of stock
 
The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).
SKU: RBwAP2nD-BE
209 GEL*
out of stock
 
The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).
SKU: RB951G-2HnD
375 GEL*
out of stock
 
The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in.
SKU: RBLTAP-2HND&R11E-LTE6
1679 GEL*
out of stock
 
An upgrade of the heavy-duty LTE access point with GPS support. LtAP LTE6 kit is a compact 4G (LTE) capable weatherproof wireless access point – perfect for busy urban environment or off-the-grid outdoors networking. It has a built-in CAT6 cellular modem that supports 4G (LTE) connectivity out of the box – with up to 300 Mbps download speed!
Menu
Products catalog
Products catalog