MikroTiK
SKU: RBmAPL-2nD
187 GEL*
out of stock
 
The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile.
SKU: RBD52G-5HacD2HnD-TC
493 GEL*
out of stock
 
The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration. New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.
SKU: CCR1036-8G-2S+
6066 GEL*
out of stock
 
The CCR1036-8G-2S+ is a high performance networking router with eight Gigabit ports, two SFP+ ports for 10G connectivity and dual power supplies for redundancy. Powered by a 36 core CPU, this router is able to perform the most complicated routing and management tasks, for managing large networks with high bandwidth requirements.
SKU: TG-BT5-IN
62 GEL*
out of stock
 
Indoor Bluetooth tags for the MikroTik KNOT or other IoT asset-tracking/telemetry setups. TG-BT5-IN: slim and sleek, perfect for indoor inventory tracking. Bluetooth tags play a huge role in IoT setups, where Bluetooth is used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example, if you have a KNOT gateway in different parts of a construction site, you can use these tags to locate construction tools, electrical equipment, and other assets.
SKU: RB5009UG+S+IN
1367 GEL*
out of stock
 
The ultimate heavy-duty home lab router with USB 3.0, 1G and 2.5G Ethernet and a 10G SFP+ cage. You can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.
SKU: RBCAPGI-5ACD2ND-XL
1 GEL*
out of stock
 
Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises. The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!
SKU: LHGmount
93 GEL*
out of stock
 
The LHG mount is the basic adapter for mast mounting of LHG series access points. Mount MikroTik Simple metallic mount for LHG products. Base bracket for mounting all LHG devices on the mast. Metal design. Full compatibility with LHG series including LHG XL models. Included with Wireless Wire Dish.
SKU: CRS125-24G-1S-2HnD-IN
1028 GEL*
out of stock
 
Cloud Router Switch is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
SKU: MTAO-LTE-5D-SQ
118 GEL*
out of stock
 
MikroTik mANT LTE 5o is an omnidirectional LTE antenna with a gain of 5 dBi, specially designed for use with LTE devices such as: wAP LTE Kit and LtAP mini LTE kit. Provides high-speed remote Internet access by improving connectivity in places with insufficient LTE coverage.
SKU: RBLHGG-5HPACD2HPND-XL
1180 GEL*
out of stock
 
Access point MikroTik LHG XL 52 AC (RBLHGG-5HPACD2HPND-XL). Dual-band PtP/CPE radio with integrated mesh antenna (27 dBi - 5 GHz/18 dBi - 2.4 GHz). Designed to provide reliable and stable radio communications up to 40 km away. You can configure a 5 GHz channel as the primary channel with data rates up to 600 Mbps. And use the 2.4 GHz channel as an automatic backup with a speed of up to 260 Mbps. The mesh construction provides wind resistance and allows the LHG XL 52 ac to operate at temperatures from –40°C to +70°C. An integrated antenna element ensures no cable loss. The device is able to handle the maximum workload when exchanging data thanks to a powerful quad-core processor and 256 MB of RAM.
SKU: S+85DLC03D
368 GEL*
out of stock
 
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
SKU: S+RJ10
267 GEL*
out of stock
 
6-speed RJ-45 module for up to 10 Gbps. This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.
SKU: RBM33G
368 GEL*
out of stock
 
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series). The RBM33G features a new two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three gigabit ethernet ports. It is specially designed for setups that requires two 3G/LTE modems. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack.
SKU: RBwsAP-5Hac2nD
368 GEL*
out of stock
 
wsAP ac lite In-wall Dual Concurrent 2.4GHz / 5GHz wireless access point with three Ethernet ports and telephone jack pass through for hospitality networks. The wsAP ac lite is a perfect access point (AP) for hospitality networks (hotels, shopping malls, hospitals, airports etc.). It has an unobtrusive case that fits in standard wall power sockets. This way, the unit doesn’t attract attention and blends into any environment. The wsAP has three Ethernet ports: one on the back side for easy PoE-in, and two LAN ports behind the front door. The device provides Dual concurrent 2.4 GHz and 5 GHz WiFi coverage, it supports 802.11ac, as well as legacy standards. A USB 2.0 port is provided, to charge mobile devices or for storage.
SKU: RBSXTsq2nD
215 GEL*
out of stock
 
The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.
SKU: RBSXTR&R11e-LTE
930 GEL*
out of stock
 
Modem Type: access point; Interface: 10/100 Ethernet, micro-SIM, miniPCI-e;
SKU: RB912R-2nD-LTm&R11e-LTE
930 GEL*
out of stock
 
Small weatherproof wireless access point with International LTE modem, two SIM slots and GPS. The LtAP mini LTE kit is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands 1,2,3,7,8,20,38 and 40. Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.
SKU: RBD53IG-5HACD2HND
680 GEL*
out of stock
 
Forget about endless searching for the perfect router and scrolling through an eternity of reviews and specifications! We have created a single affordable home access point that has all the features you might need for years to come
SKU: CRS326-24G-2S+IN
914 GEL*
out of stock
 
A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN. And it is extremely affordable – we are keeping the price on par with the previous generation desktop switches!
SKU: CSS610-1GI-7R-2S+OUT
805 GEL*
out of stock
 
With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
SKU: XS+31LC10D
930 GEL*
out of stock
 
This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
SKU: S-RJ01
119 GEL*
out of stock
 
S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.
SKU: S-55DLC80D
243 GEL*
out of stock
 
Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products, that have SFP or SFP+ cages.
SKU: S-31DLC20D
95 GEL*
out of stock
 
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
Menu
Products catalog
Products catalog