MikroTiK Router RouterBOARD M33G

კოდი: RBM33G
-უკან დაბრუნება
შემდეგი
ტექნიკური პარამეტრები MikroTiK Router RouterBOARD M33G:
მთავარი მახასიათებლები
მთავარი მახასიათებლების სრული სია
Type router
Interface 3х 10/100/1000 Ethernet
Main
Type router
Interface 3х 10/100/1000 Ethernet
RAM memory 256 MB
Flash memory 16 MB
Productivity
CPU MT7621A /880 MHz, 2 cores, 4 threads
Architecture MMIPS
Wired network
Additional ports and connectors 2x miniPCIe
2x miniSIM
1x USB 3.0 /(type A), current up to 1A, with power reset function
1х M.2 /(2242, for SSD, 1xPCIe speed)
1x microSD
1х RS232 /(console port)
Additionally
Power Supply 11-32 V /(Passive PoE* or Jack)
Operating System RouterOS Level 4
Physical
Max power consumption 19
Tested ambient temperature -40 °C - +70 °C /(operating)
გარანტია
გარანტია 12 თვე
შეფუთვის პარამეტრები
სიგანე 110 მილიმეტრი
სიმაღლე 20 მილიმეტრი
სიგრძე 150 მილიმეტრი
წონა 0.14 კგ
მოცულობა 0.0003 მ3
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series). The RBM33G features a new two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three gigabit ethernet ports. It is specially designed for setups that requires two 3G/LTE modems. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack.
RBM33G board is specially designed for installations with two 3G / LTE modems.

Use cases:

  • two miniPCIe modems (there are two slots for SIM-cards);
  • one miniPCIe and one USB 3G / LTE modem, leaving a second miniPCIe slot for an 802.11 * radio card.

* Simultaneous use of two 802.11 wireless cards with this unit is not possible. It is recommended to use the J8 slot for the LTE modem and the J10 slot for the radio card.

მენიუ
კატალოგი
კატალოგი