ESS 2E Power Station Kufa 5000W, 10.24 kWh

კოდი: 2E-ESS-PSK5-10
-უკან დაბრუნება
შემდეგი
ტექნიკური პარამეტრები ESS 2E Power Station Kufa 5000W, 10.24 kWh:
მთავარი მახასიათებლები
მთავარი მახასიათებლების სრული სია
Type система резервного питания
Номинальная выходная мощность 5000 W
Максимальная пиковая мощность 10000 VA
Номинальное выходное напряжение (в переменном токе) 220
Частота 50 Гц
Время автоматического переключения <10 мс
Максимальная мощность зарядки от сети переменного тока 3150 W
Максимальный входящий ток от сети переменного тока 60 A
Номинальная выходная мощность 5000 W
Максимальный выходной ток 30 A
Тип зарядки от фотоэлектрической панели MPPT
Максимальная входная мощность 5500 W
Максимальный входящий ток от фотоэлектрической панели 100 A
Диапазон рабочих температур 15 °С ~ 55 °С
Режим охлаждения воздушное охлаждение
Вес 20 kg
Тип аккумулятора LiFePO4
Энергия аккумулятора 10.24 кВт·ч
Емкость аккумулятора 100 A·h
Максимальное количество параллельно соединенных аккумуляторов 15
Расчетный срок службы аккумулятора 6 000 циклов
Рабочая температура подзарядка: 0 ~45 °C
разрядка: -10 ~45 °C
Основные
Type система резервного питания
Параметры инвертора
Номинальная выходная мощность 5000 W
Максимальная пиковая мощность 10000 VA
Коэффициент мощности 1
Номинальное выходное напряжение (в переменном токе) 220
Частота 50 Гц
Время автоматического переключения <10 мс
Гармонические искажения <3%
Вход переменного тока
Максимальная мощность зарядки от сети переменного тока 3150 W
Максимальный входящий ток от сети переменного тока 60 A
Номинальное входное напряжение 220/230 В переменного тока
Диапазон входного напряжения 90~280 В переменного тока
Выход переменного тока
Номинальная выходная мощность 5000 W
Максимальный выходной ток 30 A
Частота 50 Гц
Перегрузочный ток 40 A
Фотоэлектрический вход
Тип зарядки от фотоэлектрической панели MPPT
Максимальная входная мощность 5500 W
Максимальный входящий ток от фотоэлектрической панели 100 A
Диапазон рабочего напряжения фотоэлектрической панели 120~500 В
Диапазон напряжения MPPT 120~450 В
Физические параметры инвертора
Диапазон рабочих температур 15 °С ~ 55 °С
Диапазон температур хранения -25 °С ~ 60 °С
Диапазон влажности 5% дo 95%
Номинальная высота эксплуатации <2000 м
Режим охлаждения воздушное охлаждение
Уровень шума 60 дБ
Степень защиты IP20
Сертификация CE (EN62109-1)
Уровень сертификации EMC EN61000
Вес 20 kg
Dimensions (LxWxH) 442 х 410 х 150 mm
Параметры модуля сохранения энергии
Тип аккумулятора LiFePO4
Энергия аккумулятора 10.24 кВт·ч
Емкость аккумулятора 100 A·h
Номинальное напряжение аккумулятора 51.2 V
Диапазон рабочего напряжения аккумулятора 44,8 ~ 57,6 В
Стандартный ток зарядки 50 A
Стандартный ток разрядки 50 A
Максимальный ток зарядки 100 A
Максимальный ток разрядки 100 A
Глубина разряда DOD 95 %
Максимальное количество параллельно соединенных аккумуляторов 15
Расчетный срок службы аккумулятора 6 000 циклов
Рабочая температура подзарядка: 0 ~45 °C
разрядка: -10 ~45 °C
Вес 115 kg
Dimensions (LxWxH) 575 x 535,5 x 654,6 mm
შეფუთვის პარამეტრები
სიგანე 730 მილიმეტრი
სიმაღლე 830 მილიმეტრი
სიგრძე 630 მილიმეტრი
წონა 151.00 კგ
მოცულობა 0.3817 მ3
გარანტია
გარანტია 12 თვე
The 2E KUFA is a technological hybrid solution that provides full autonomy and is suitable for integration into a larger power system if required. The design includes a 5,000W inverter, high-quality LiFePO₄ batteries with a total capacity of 10.24 kWh, a powerful 5.5 kW MPPT system, intelligent control, modular architecture and out-of-the-box availability.
6699 ლარი*
ხელმისაწვდომია
 
* საშუალო ფასი ბაზარზე
Hybrid Inverter: Power, Stability, Accuracy

The KUFA is based on a professional hybrid inverter with a rated output power of 5,000 W and a peak power of up to 10,000 VA. This enables the station to withstand sudden loads, for example when starting pumps, compressors, refrigerators or boilers.

The power factor of 1 ensures that all power is used efficiently and without loss. The inverter generates a pure sine wave with < 3 % distortion, which is important for powering sensitive devices such as medical equipment, computer hardware, servers, video surveillance systems, etc.

Intelligent SPWM technology (Sinusoidal Pulse Width Modulation) ensures accurate conversion of DC to AC, and the switching time to backup power is less than 10 ms. The operating frequency is standard 50 Hz, the rated output voltage is 220/230 V.

Charging Via Grid: Stability Even at Unstable Voltages

The KUFA supports charging from the AC grid with a maximum power output of 3,150 W, which allows the batteries to be fully charged in approximately 3-4 h. The input voltage range is from 90 to 280 V, so the system is resistant to overvoltage or undervoltage. The maximum input current is 60 A. Dual digital closed-loop voltage and current control algorithms ensure high charging accuracy and reliable battery protection, extending battery life.

Solar Power: Maximum Efficiency with 5.5 kW MPPT

The KUFA is equipped with an integrated 5,500 W MPPT controller that supports efficient charging from solar panels even in changing weather conditions. The controller has a wide input voltage range (120 to 500 V) with an optimal MPPT range of 120-450 V. This makes it possible to combine different configurations of PV panels, both series and parallel.

The maximum input current of 100 A ensures efficient use of the power of even large solar arrays. Thanks to this, KUFA can fully function in off-grid mode without depending on external power sources.

10.24 kWh Batteries

The system includes two LiFePO₄ battery modules, each with a capacity of 5.12 kWh (100 Ah, 51.2 V). This provides a total accumulated energy of 10.24 kWh, which is enough to power an average private house for a day (with an average daily consumption of 8-10 kWh). The key advantages of LiFePO₄ cells are their long service life (up to 6,000 cycles at 80 % DOD), resistance to overheating, chemical stability, low self-discharge and a discharge depth of up to 95 %.

It also features an integrated BMS (Battery Management System) technology that manages each battery individually: it controls temperature, voltage, current, cell balancing and protection against short circuits, overload, deep discharge and overheating.

Capacity Expansion: up to 15 Modules, up to 76.8 kWh

The KUFA has a scalable architecture. Up to 15 battery modules can be connected to the base station, increasing the total capacity to 76.8 kWh. This solution is ideally suited for facilities with high energy consumption, such as mini-farms, remote stations, residential complexes or service sites. Scalability is achieved without loss of efficiency or the need to change the primary infrastructure.

Compact Form Factor

Despite its impressive power output, the KUFA maintains a compact size of 575 × 535.5 × 654.6 mm, while the total weight of the system is 115 kg. This makes it suitable for use as a portable solution – for example, in the field, for campsites, mobile workshops, communication centres or mobile laboratories.

IP20 protection, air cooling, an operating temperature range of -15 °C to +55 °C, and a humidity resistance of up to 95 % – all of these are key to the KUFA’s stable operation in challenging environments.

Certified Safety

The KUFA meets the requirements of CE (EN62109-1) and EMC (EN61000), the international safety standards for energy storage and transmission devices. This guarantees quality of construction, compliance with electromagnetic standards, and safety for users and the environment.

  • Hybrid inverter 5,000 W with a peak load of up to 10,000 VA
  • Built-in LiFePO₄ batteries with a total capacity of 10.24 kWh and a lifetime of up to 6,000 cycles
  • Maximum number of parallel modules 15
  • MPPT controller 5.5 kW
  • Digital intelligent inverter with SPWM technology
  • Input and output protection, double closed loop current and voltage control
  • Switching time to the reserve < 10 ms
  • Harmonic distortion < 3 %
  • Grid charging power up to 3,150 W
  • Wide input voltage range 90-280 V
  • Intelligent control system BMS
  • Noise level 60 dB(A)
  • Protection class IP20
მენიუ
კატალოგი
კატალოგი